Playhouse base preparation and other information
Ideally your building should have a clear space at least 18" wide on all sides, if possible. This ensures easy access for both installation and future maintenance. In reality this is often not practical and at many sites it is not needed. A reduced clearance is often possible on one or two sides. If the space around your building is restricted remember to allow for any roof overhang. You should also cut back or remove any nearby shrubs and trees. Remember to allow for future growth. If possible a sheltered position is better.
All buildings need a substantial base. The base should be solid, square, flat and level to ensure the stability of your building. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger building. Paving slabs are more practical and cost effective, especially for a smaller base at the far end of the garden. The base should be no smaller than the floor size of the new building and no more than a few inches larger.
If your order includes delivery only you will receive advance notice of the delivery day either in writing or by telephone. If it is not convenient you can postpone the delivery with reasonable notice. A clear access route is required from the lorry to a suitable storage place nearby. For security reasons, it is normally necessary for someone to be at home to accept delivery.
If your order includes installation the building will be delivered and installed on the same day by prior appointment with you. A clear access route is required from the lorry to the prepared base, with no access restrictions. The sections are often large flat panels which may be as long as the building. Possible restrictions include archways, narrow passages, sharp corners and flights of steps. It is not normally possible to lift large panels over fences and walls. Access through the house may be possible with advance notice. If required larger panels can be made in smaller sections for a small surcharge. Please advise us if there are any access restrictions at the site.
Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large buildings can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. You should not attempt to lift heavy sections without a helping pair of hands. Remember that extra time spent preparing a good base is normally repaid with time saved later on during the installation.
The external timber should be treated with a good quality wood stain every year. This will prolong the life of your building. All major wood stain manufacturers offer suitable products in a choice of colours, available at any good hardware shop. It is not necessary to treat cedar which is a naturally resilient timber and does not deteriorate appreciably even under severe climatic changes. If untreated cedar will gradually fade to a silvery grey. We also recommend that you regularly oil the door and window hinges as required to ensure continued smooth operation.